R2E250-BE03-14

Type R2E250-BE03-14
Motor M2E074-EI
Phase 1~
Nominal voltage VAC 230
Frequency Hz 50
Method of obtaining data fa
Valid for approval/standard –
Speed (rpm) min-1 2350
Power consumption W 310
Current draw A 1.36
Capacitor µF 7
Capacitor voltage VDB 400
Capacitor standard S0 (CE)
Min. back pressure Pa 0
Min. back pressure in. wg 0
Min. ambient temperature °C -25
Max. ambient temperature °C 55
Starting current A 2.1
Mass 8.02 kg
Size 250 mm
Motor size 74
Rotor surface Unpainted
Impeller material Sheet steel, rust-resistant
Number of blades 6
Motor suspension Motor mounted on support plate for one-sided vibration damping
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP44; installation- and position-dependent
Insulation class “F”
Moisture (F) / Environmental (H)
protection class
H0 – dry environment
Max. permitted ambient temp.
for motor (transport/storage) + 80 °C
Min. permitted ambient temp. for
motor (transport/storage) – 40 °C
Installation position Any
Condensation drainage holes None
Mode S1
Motor bearing Ball bearing