Tipo A3G800-AS26-03
Motor M3G150-FF
Fase 3~
Tensión nominal VAC 400
Rango de tensión nominal VAC 380 .. 480
Frecuencia Hz 50/60
Método de obtención de datos ml
Estado prelim.
Velocidad (rpm) min-1 1000
Consumo de potencia W 2200
Consumo de corriente A 3,4
Contrapresión máx. Pa 200
Contrapresión máx. en wg 0,8
Temperatura ambiente mín. °C -40
Temperatura ambiente máx. °C 60
Size 800 mm
Motor size 150
Rotor surface Painted black
Electronics housing material Die-cast aluminum, painted gray
Blade material Sheet aluminum insert, sprayed with PP plastic
Number of blades 5
Blade pitch 0°
Airflow direction V
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP55
Insulation class “F”
Moisture (F) / Environmental (H)
protection class H2
Ambient temperature note Occasional start-up at temperatures between -40°C and -25°C is permitted. For
continuous operation at ambient temperatures below -25°C (such as refrigeration
applications), use must be made of a fan design with special low-temperature bearings.
Max. permitted ambient temp.
for motor (transport/storage) +80 °C
Min. permitted ambient temp. for
motor (transport/storage) -40 °C
Installation position Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing
