R4E400-AP17-06

Type R4E400-AP17-06
Motor M4E094-HA
Phase 1~ 1~
Nominal voltage VAC 230 230
Frequency Hz 50 60
Method of obtaining data ml ml
Valid for approval/standard CE CE
Speed (rpm) min-1 1370 1460
Power consumption W 480 700
Current draw A 2.4 3.15
Capacitor μF 10 10
Capacitor voltage VDB 450 450
Capacitor standard S0 (CE) S0 (CE)
Min. back pressure Pa 0 0
Min. back pressure in. wg 0 0
Min. ambient temperature °C -40 -40
Max. ambient temperature °C 80 55
Mass 8.54 kg
Size 400 mm
Motor size 94
Rotor surface Painted black
Impeller material Sheet aluminum
Number of blades 6
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP54
Insulation class “F”
Moisture (F) / Environmental (H)
protection class H2
Ambient temperature note Occasional start-up at temperatures between -40°C and -25°C is permitted. For
continuous operation at ambient temperatures below -25°C (such as refrigeration
applications), use must be made of a fan design with special low-temperature bearings.
Max. permitted ambient temp.
for motor (transport/storage) +80 °C
Min. permitted ambient temp. for
motor (transport/storage) -40 °C
Installation position Any
Condensation drainage holes None
Mode S1
Motor bearing Ball bearing
Touch current according to IEC
60990 (measuring circuit Fig. 4,
TN system) <= 3.5 mA
Motor protection Thermal switch auto reset, lead out, with basic insulation
With cable Variable
Protection class assignment I; If a protective earth is connected.
The built-in component has several local protection class assignments.
The final protection class is determined by the intended installation.
Motor capacitor according to EN
60252-1 in safety protection class S0
Conformity with standards EN 60034-1 (2004)
Comment on CE Commissioning not permitted in the European Economic Area
Approval EAC; CCC