Type 614 NHHR
Rotating direction looking at rotor Clockwise
Airflow direction Air outlet over struts
Bearing system Ball bearing
Mounting position – shaft Any
Width 60,0 mm
Height 60,0 mm
Depth 25,0 mm
Mass 0,066 kg
Housing material Plastic
Impeller material Plastic
Max. torque when mounted across both mounting flanges
Screw size
Wire outlet corner: 20 Ncm
Remaining corners: 40 Ncm
ISO 4762 – M3 degreased, without an additional
brace and without washer
Voltage range U 18,0 V 26,0 V
Nominal voltage UN 24,0 V
Power consumption Tolerance
∆p = 0 1,6 W 3 W 3,5 W
0010 P +- 17,5 % +- 12,5 % +- 17,5 %
Current consumption Tolerance
∆p = 0 90 mA 125 mA 135 mA
0010 I +- 17,5 % +- 12,5 % +- 17,5 %
Speed Tolerance
∆p = 0 5.300 1/min 6.850 1/min 7.300 1/min
0010 n +- 15,0 % +- 10,0 % +- 15,0 %
Starting current consumption 694 mA
Electronic function None
Reversed polarity protection Rectifying diode
Max. residual current at UN IF <= 5 uA
Locked rotor protection Auto restart
Locked rotor current at UN Iblock approx. 694 mA
Clock signal at locked rotor t3 / t4 typical: 0,2 s / 1,1 s
6.850 1/min at free air flow
Max. free-air flow (∆p = 0 / = max.) 54,0 m3/h
Max. static pressure (∆p = max. / =0) 134 Pa
COMPACT AXIAL FANS DC
