G2E120-AR38-C6

Type G2E120-AR38-C6
Motor M2E068-BF
Phase 1~ 1~
Nominal voltage VAC 230 230
Frequency Hz 50 60
Method of obtaining data fa fa
Valid for approval/standard CE CE
Speed (rpm) min-1 2500 2600
Power consumption W 83 110
Current draw A 0.37 0.5
Capacitor μF 2 2
Capacitor voltage VDB 450 450
Capacitor standard S2 (CE) S2 (CE)
Min. back pressure Pa 0 0
Min. back pressure in. wg 0 0
Min. ambient temperature °C -25 -25
Max. ambient temperature °C 50 60
Mass 2.09 kg
Size 120 mm
Motor size 68
Rotor surface Unpainted
Impeller material Sheet steel, galvanized
Housing material Die-cast aluminum
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP44; installation- and position-dependent
Insulation class “B”
Moisture (F) / Environmental (H)
protection class H0 – dry environment
Max. permitted ambient temp.
for motor (transport/storage) +80 °C
Min. permitted ambient temp. for
motor (transport/storage) -40 °C
Installation position Shaft horizontal
Condensation drainage holes None
Mode S1
Motor bearing Ball bearing
Touch current according to IEC
60990 (measuring circuit Fig. 4,
TN system) < 0.75 mA
Electrical hookup Connector with cable; Capacitor mounted
Motor protection Thermal switch auto reset, internally connected
With cable Axial
Protection class assignment I; If a protective earth is connected.
The built-in component has several local protection class assignments.
The final protection class is determined by the intended installation.
Motor capacitor according to EN
60252-1 in safety protection class S2
Conformity with standards EN 60335-1; EN 60034-1; EN 60204-1; CE
Comment on CE Ecodesign Directive 2009/125/EC + Fan Directive (EC) No. 327/2011 does not apply, as power consumption <125W.