G1G170-AB53-03

Type G1G170-AB53-03
Motor M1G074-CF
Phase 1~
Nominal voltage VAC 230
Frequency Hz 50/60
Method of obtaining data fa
Speed (rpm) min-1 5830
Power consumption W 360
Current draw A 1.6
Min. ambient temperature °C -25
Max. ambient temperature °C 55
Min. temp. of flow medium °C -25
Max. temp. of flow medium °C +80
Mass 4.47 kg
Fan size 170 mm
Rotor surface Painted black
Cover material Polyflam RPP 374-ND CS1 (UL 97-V0)
Impeller material Sheet aluminum
Housing material Die-cast aluminum
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP20
Insulation class “B”
Moisture (F) / Environmental (H)
protection class H0 – dry environment
Max. permitted ambient temp.
for motor (transport/storage) +80 °C
Min. permitted ambient temp. for
motor (transport/storage) -40 °C
Installation position Any
Cooling hole/opening On rotor side
Mode S1
Premixing If gas is premixed in the blower, then a special blower must be used. Please consult us about this.
Motor bearing Ball bearing
Technical features – PFC, active
– PWM control input
– Motor current limitation
– Tach output
– Thermal overload protection for motor
EMC immunity to interference According to EN 61000-6-2 (industrial environment)
EMC circuit feedback According to EN 61000-3-2/3
EMC interference emission According to EN 61000-6-3 (household environment)
Touch current according to IEC
60990 (measuring circuit Fig. 4,
TN system) <= 3.5 mA
Electrical hookup With plug
Motor protection Thermal overload protector (TOP) internally connected
Approval UL 507; CSA C22.2 No. 113