VBH0190RSLES – 8300100183

Item 8300100183
Motor E06003-23
Phase 1~
Nominal voltage VAC 230
Nominal voltage range VAC 200 .. 240
Frequency Hz 50/60
Method of obtaining data ml
Speed (rpm) min-1 4150
Power consumption W 170
Current draw A 1.35
Min. ambient temperature °C -25
Max. ambient temperature °C 60
Mass 1.77 kg
Size 190 mm
Motor size 60
Rotor surface Thick-film passivated
Electronics housing material Die-cast aluminum
Impeller material PP plastic
Housing material PA plastic
Number of blades 7
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP54
Insulation class “B”
Moisture (F) / Environmental (H)
protection class H1
Max. permitted ambient temp.
for motor (transport/storage) +80 °C
Min. permitted ambient temp. for
motor (transport/storage) -40 °C
Installation position Any
Condensation drainage holes None, open rotor
Mode S1
Motor bearing Ball bearing
Technical features – Output 10 VDC, max. 10 mA
– Locked-rotor detection
– Tach output
– Speed control
– Power limiter
– Motor current limitation
– Soft start
– Control input 0-10 VDC / PWM
– Control interface with SELV potential safely disconnected from the mains
– Overvoltage detection
– Thermal overload protection for electronics/motor
– Line undervoltage detection
EMC immunity to interference According to EN 61000-6-2 (industrial environment)
EMC interference emission According to EN 61000-6-4 (industrial environment)
Touch current according to IEC
60990 (measuring circuit Fig. 4,
TN system) <= 3.5 mA
Motor protection Electronic motor protection
With cable Variable
Protection class assignment I; If a protective earth is connected by the customer
This component for installation may have several local protection classes. This
information relates to this component’s basic design.
The final protection class is based on the component’s intended installation and
connection.
Conformity with standards EN 60034-1; EN 60204-1; EN 60335-1; UKCA; CE
Approval UL 1004-7 + 60730-1; CSA C22.2 No. 77 + CAN/CSA-E60730-1