D2E146-AP47-33

Type D2E146-AP47-33
Motor M2E068-EC
Phase 1~ 1~
Nominal voltage VAC 230 230
Frequency Hz 50 60
Method of obtaining data ml ml
Valid for approval/standard – –
Speed (rpm) min-1 2050 2550
Power consumption W 300 330
Current draw A 1.31 1.45
Capacitor μF 8 8
Capacitor voltage VDB 400 400
Capacitor standard S0 (CE) S0 (CE)
Min. back pressure Pa 200 400
Min. back pressure in. wg 0.8 1.61
Min. ambient temperature °C -25 -25
Max. ambient temperature °C 50 45
Mass 4.3 kg
Size 146 mm
Motor size 68
Rotor surface Painted black
Impeller material Sheet steel, painted black
Housing material Sheet steel, galvanized
Motor suspension Motor mounted with brackets on one side
Direction of rotation Counterclockwise, viewed toward rotor
Degree of protection IP44; installation- and position-dependent as per EN 60034-5
Insulation class “F”
Moisture (F) / Environmental (H)
protection class H1
Max. permitted ambient temp.
for motor (transport/storage) + 80 °C
Min. permitted ambient temp. for
motor (transport/storage) – 40 °C
Installation position Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing
Touch current according to IEC
60990 (measuring circuit Fig. 4,
TN system) < 0.75 mA
Motor protection Thermal overload protector (TOP) with basic insulation
With cable Variable
Protection class I (with customer connection of protective earth)
Conformity with standards EN 60335-1
Approval EAC