D2E160-GL19-20

Motor M2E074-HA
Phase 1~
Nominal voltage VAC 230
Frequency Hz 50
Method of obtaining data ml
Valid for approval/standard CE
Speed (rpm) min-1 1850
Power consumption W 450
Current draw A 2
Capacitor μF 10
Capacitor voltage VDB 400
Capacitor standard S2 (CE)
Min. back pressure Pa 215
Min. back pressure in. wg 0.86
Min. ambient temperature °C -25
Max. ambient temperature °C 40
Starting current A 2.25

Mass 6.9 kg
Size 160 mm
Motor size 74
Rotor surface Partly cast in aluminum
Terminal box material PP plastic
Impeller material Sheet steel, galvanized
Housing material PP plastic
Motor suspension Motor vibration-damped on both sides
Direction of rotation Counterclockwise, viewed toward rotor
Degree of protection IP20
Insulation class “F”
Moisture (F) / Environmental (H)
protection class
H0 – dry environment
Max. permitted ambient temp.
for motor (transport/storage) + 80 °C
Min. permitted ambient temp. for
motor (transport/storage) – 40 °C
Installation position Any
Condensation drainage holes None, open rotor
Mode S1
Motor bearing Ball bearing
Speed levels 5
Touch current according to IEC
60990 (measuring circuit Fig. 4,
TN system) < 0.75 mA
Electrical hookup Plug; Via terminal box, capacitor integrated and connected
Motor protection Thermal overload protector (TOP) with basic insulation
With cable Axial
Protection class I (with customer connection of protective earth)
Motor capacitor according to EN
60252-1 in safety protection class S2
Conformity with standards EN 60335-1; CE