Type D2D146-AA02-13
Motor M2D068-EC
Phase 3~
Nominal voltage VAC 400
Wiring Y
Frequency Hz 50
Method of obtaining data ml
Valid for approval/standard –
Speed (rpm) min-1 2250
Power consumption W 290
Current draw A 0.47
Min. back pressure Pa 275
Min. back pressure inH2O 1.1
Min. ambient temperature °C -25
Max. ambient temperature °C 60
Starting current A 1.0
Mass 4.4 kg
Fan size 146 mm
Rotor surface Partly cast in aluminum
Impeller material Sheet steel, hot-dip galvanized
Housing material Sheet steel, hot-dip galvanized
Motor suspension Motor mounted with brackets on one side
Direction of rotation Counterclockwise, viewed toward rotor
Degree of protection IP44
Insulation class “F”
Moisture (F) / Environmental (H)
protection class F2-2
Max. permitted ambient temp.
for motor (transport/storage) + 80 °C
Min. permitted ambient temp. for
motor (transport/storage) – 40 °C
Installation position Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing
For more information about this product you can download the following PDF.
