K3G310-RR05-H2

Type K3G310-RR05-H2
Motor M3G084-DF
Phase 1~
Nominal voltage VAC 230
Nominal voltage range VAC 200 .. 277
Frequency Hz 50/60
Method of obtaining data ml
Speed min-1 2360
Power consumption W 500
Current draw A 2.2
Min. ambient temperature °C -25
Max. ambient temperature °C 60
Mass 9.5 kg
Fan size 310 mm
Rotor surface Painted black
Electronics housing material Die-cast aluminum
Impeller material PP plastic
Support plate material Sheet steel, galvanized
Support bracket material Steel, painted black
Inlet nozzle material Sheet steel, galvanized
Number of blades 6
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP55
Insulation class “F”
Moisture (F) / Environmental (H)
protection class F3-1
Max. permitted ambient temp.
for motor (transport/storage) +80 °C
Min. permitted ambient temp. for
motor (transport/storage) -40 °C
Installation position Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing
Technical features – Output 10 VDC, max. 10 mA
– Operation and alarm display
– Alarm relay
– Integrated PID controller
– Power limiter
– Motor current limitation
– PFC, active
– RS-485 MODBUS-RTU
– Soft start
– Control input 0-10 VDC / PWM
– Control interface with SELV potential safely disconnected from supply
– Thermal overload protection for electronics/motor
– Line undervoltage / phase failure detection

For more information about this product you can download the following PDF.