A4E330-AB16-20

Type A4E330-AB16-20
Motor M4E068-DF
Phase 1~ 1~
Nominal voltage VAC 230 230
Frequency Hz 50 60
Method of obtaining data fa fa
Valid for approval/standard CE CE
Speed (rpm) min-1 1350 1500
Power consumption W 100 140
Current draw A 0.45 0.62
Capacitor µF 4 4
Capacitor voltage VDB 400 400
Capacitor standard S0 (CE) S0 (CE)
Max. back pressure Pa 75 80
Max. back pressure in. wg 0.3 0.32
Min. ambient temperature °C -25 -25
Max. ambient temperature °C 65 45
Starting current A 0.86 0.81
Mass 2.37 kg
Size 330 mm
Motor size 68
Rotor surface Painted black
Blade material Sheet steel, painted black
Number of blades 5
Airflow direction V
Direction of rotation Counterclockwise, viewed toward rotor
Degree of protection IP44; installation- and position-dependent as per EN 60034-5
Insulation class «F»
Moisture (F) / Environmental (H)
protection class H1+
Max. permitted ambient temp.
for motor (transport/storage) + 80 °C
Min. permitted ambient temp. for
motor (transport/storage) – 40 °C
Installation position Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing
Touch current according to IEC
60990 (measuring circuit Fig. 4,
TN system) < 0.75 mA
Electrical hookup Connector with cable
Motor protection Thermal overload protector (TOP) internally connected
With cable Axial
Protection class I (with customer connection of protective earth)
Conformity with standards EN 60335-1; CE