R3G310-RR12-P1

Type R3G310-RR12-P1
Motor M3G084-DF
Nominal voltage / VDC 110
Nominal voltage
range / VDC 77 .. 138
Method of obtaining data ml
Speed (rpm) / min-1 2260
Power consumption / W 465
Current draw / A 4.2
Min. ambient temperature / °C -40
Max. ambient temperature / °C 60
Mass 4.6 kg
Size 310 mm
Motor size 84
Rotor surface Painted black
Electronics housing material Die-cast aluminum
Impeller material PA plastic UL94 V0
Number of blades 6
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP55
Insulation class «F»
Moisture (F) /
Environmental (H)
protection class H3
Installation position Shaft horizontal or rotor on bottom; rotor
on top on request
Condensation
drainage holes
On rotor side
Mode S1
Motor bearing Ball bearing; (sealed)
Technical features – Output 10 VDC, max. 10 mA
– Operation and alarm display
– Alarm relay
– Integrated PID controller
– Run monitoring
– Power limiter
– Motor current limitation
– RS-485 MODBUS-RTU
– Soft start
– EEPROM write cycles: 100,000
maximum
– Control input 0-10 VDC / PWM
– Control interface with SELV potential
safely disconnected from supply
– Overvoltage detection
– Thermal overload protection for
electronics/motor
– Line undervoltage detection
Motor protection Thermal overload protector (TOP)
internally connected
with cable Lateral
Protection class
assignment
I; If a protective earth is connected by
the customer
This component for installation may
have several local protection classes.
This information relates to this
component’s basic design.
The final protection class is based on
the component’s intended installation and
connection.
Conformity with standards
EN 15085-1, CPC3; EN 45545-2, HL3;
EN 50155; EN 61373, Cat. 1B
Approval EAC
Comment If supply potential (e.g. 230 VAC) is
passed through the alarm relay, the
SELV signal wires lose their property of
reinforced insulation, meaning they then
have only basic insulation
The SELV property (reinforced
insulation) is not lost when voltages of up
to 110 VDC are passed through the
alarm relay. EMC regulation: EN 50121-
3-2 in preparation