R3G310-PH58-01

Type R3G310-PH58-01
Motor M3G112-GA
Phase 3~
Nominal voltage VAC 400
Nominal voltage range VAC 380 .. 480
Frequency Hz 50/60
Method of obtaining data ml
Speed (rpm) min-1 4000
Power consumption W 2950
Current draw A 4.6
Min. ambient temperature °C -25
Max. ambient temperature °C 40
Mass 10.85 kg
Size 310 mm
Motor size 112
Rotor surface Painted black
Electronics housing material Die-cast aluminum
Impeller material Sheet aluminum
Number of blades 5
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP54
Insulation class «B»
Moisture (F) / Environmental (H)
protection class H1
Max. permitted ambient temp.
for motor (transport/storage) +80 °C
Min. permitted ambient temp. for
motor (transport/storage) -40 °C
Installation position Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing
Technical features – Output 10 VDC, max. 10 mA
– Output 20 VDC, max. 50 mA
– Output for slave 0-10 V
– Operation and alarm display
– Input for sensor 0-10 V or 4-20 mA
– External 24 V input (parameter setting)
– External release input
– Alarm relay
– Integrated PID controller
– Power limiter
– Motor current limitation
– PFC, passive
– RS-485 MODBUS-RTU
– Soft start
– Control input 0-10 VDC / PWM
– Control interface with SELV potential safely disconnected from the mains
– Thermal overload protection for electronics/motor
– Line undervoltage / phase failure detection
EMC immunity to interference According to EN 61000-6-2 (industrial environment)
EMC interference emission According to EN 61000-6-3 (household environment), except EN 61000-3-2 for
professionally used equipment with a total rated power greater than 1 kW
Touch current according to IEC
60990 (measuring circuit Fig. 4,
TN system) <= 3.5 mA
Electrical hookup Terminal box
Motor protection Thermal overload protector (TOP) internally connected
With cable Variable