Type G2E180-EH03-23
Motor M2E074-EI
Phase 1~ 1~
Nominal voltage VAC 230 230
Frequency Hz 50 60
Method of obtaining data fa ml
Valid for approval/standard CE CE
Speed (rpm) min-1 1950 2150
Power consumption W 400 415
Current draw A 1.75 1.82
Capacitor μF 8 8
Capacitor voltage VDB 400 400
Capacitor standard S2 (CE) S2 (CE)
Min. back pressure Pa 0 250
Min. back pressure in. wg 0 1
Min. ambient temperature °C -25 -25
Max. ambient temperature °C 40 30
Starting current A 2.2 2
Mass 5.6 kg
Size 180 mm
Motor size 74
Rotor surface Painted black
Impeller material Sheet steel, painted black
Housing material Die-cast aluminum
Guard grille material Steel, coated with black plastic (RAL 9005)
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP44; installation- and position-dependent as per EN 60034-5
Insulation class «B»
Moisture (F) / Environmental (H)
protection class H0 – dry environment
Max. permitted ambient temp.
for motor (transport/storage) +80 °C
Min. permitted ambient temp. for
motor (transport/storage) -40 °C
Installation position Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing
Touch current according to IEC
60990 (measuring circuit Fig. 4,
TN system) < 0.75 mA
Electrical hookup Plug
Motor protection Thermal switch auto reset, internally connected
Protection class assignment I; If a protective earth is connected by the customer
This component for installation may have several local protection classes. This
information relates to this component’s basic design.
The final protection class is based on the component’s intended installation and
connection.
Motor capacitor according to EN
60252-1 in safety protection class S2
Conformity with standards EN 60335-1; EN 60034-1; EN 60204-1; CE