Type W3G630-GU31-08
Motor M3G150-IF
Phase 3~
Nominal voltage VAC 400
Nominal voltage range VAC 380 .. 480
Frequency Hz 50/60
Method of obtaining data ml
Status prelim.
Speed (rpm) min-1 1580
Power consumption W 3700
Current draw A 5.6
Max. back pressure Pa 340
Max. back pressure in. wg 1.36
Min. ambient temperature °C -40
Max. ambient temperature °C 60
Mass 40.1 kg
Size 630 mm
Motor size 150
Rotor surface Painted black
Electronics housing material Die-cast aluminum, painted gray
Blade material Sheet aluminum insert, sprayed with PP plastic
Fan housing material Sheet steel, galvanized and coated with black plastic (RAL 9005)
Guard grille material Steel, coated with black plastic (RAL 9005)
Number of blades 5
Blade pitch 0°
Airflow direction A
Direction of rotation Counterclockwise, viewed toward rotor
Degree of protection IP55
Insulation class «F»
Moisture (F) / Environmental (H) protection classH2
Ambient temperature note Occasional start-up at temperatures between -40°C and -25°C is permitted.
For continuous operation at ambient temperatures below -25°C (such as refrigeration
applications), use must be made of a fan design with special low-temperature bearings.
Max. permitted ambient temp. for motor (transport/storage) +80 °C
Min. permitted ambient temp. for motor (transport/storage) -40 °C
Installation position Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing